Jumbo HV6188, Manual

Page: 18 / 49

5. Assembling the steering wheel
•
As shown, the first docking connector
•
Install the steering wheel, and then use the
original machine screws and 5 x50 Nut fixed
6. Assembling the windshield
•
Put the windshield card at the front of the car
•
4x12 screws with two hearts
7. Assembling the viewfinders
• Make sure of the right
.side for each viewfinder. Insert the
viewfinders into the bodywork.
8. Assembling the seat
·
Insert the seat into the bodywork.
•
Fasten with 4x12 flat-headed screws.
Note: Connect the connectors of the accumulator and the motor before assembling
the seat.
The whole vehicle assembling is finished now. Check and see if there is anything left
uninstalled; check and see if the functions of the product are normal; charge the
product with the charger supplied in time.
3