(Fig. 1)
Note: Remote control operation function is same as the control
panel on unit.
Install one CR2025 lithium button battery (include).
Remote control
OPERATION
Control panel
Power
“ ”
Press this button to turn on the unit, press it again to turn off the unit. (the fan
with memory function and working at last setting, except “Timer”)
Timer
“ ”
It can be set between 1 to 8 hours, increased by 1 hour intervals.
Mode
“ ”
Press this button to select desired wind mode, NORMAL
→
NATURE
→
SLEEP
→
NORMAL, in turn. The corresponding wind mode indicator will be displayed.
Speed
“ ”
Press this button to select desired fan speed, LOW
→
MID
→
HIGH
→
LOW, can be
adjust the fan speed in “normal” mode use only.
Swing
“ ”
Press this button for Fan Oscillation with left and right direction, press it again
to stop, and you can also adjust the fan's up and down direction by hands.
Cooler
“ ”
Press this button to turn on/off the cooling function.
Note: Before acting this function, be sure to fill enough water into the water
tank.
1.
2.
3.
4.
5.
6.
POWER
SPEED
MODE
TIMER
SWING
COOL
Cool
Swing
Low
Mid
High
Nor.
Nat.
Sleep
1H
2H
4H
8H
Power
CLEANING AND MAINTENANCE
Dry the honeycomb after using to avoid mildew;
Replace and cleaning the water regularly to keep
water clean.
Use a dry cloth to absorb remaining water inside the
tank, and dry it using a piece of soft cloth;
Pack this appliance properly and store it in a cool dry
place if it is not to be used for a long period of time.
Unplug the unit before cleaning.
Remove the rear net first.
Take out the honeycomb and clean it with the rear net.
Clean the water tank and the top flume at the same
time.
Use soft cloth and liquid for cleaning.
Any part of control panel cannot be stained with water.
Maintenance:
1.
2.
3.
4.
Cleaning:
1.
2.
3.
4.
Caution:
1.
2.
50
|
51
GB
