Julabo FD200 Operating Manual Download Page 6

 

17 

 

4. 

Safety notes for the user 

4.1. 

Explanation of safety notes 

 

In addition to the safety warnings listed above, warnings are posted 
throughout the manual. These warnings are designated by an exclamation 
mark inside an equilateral triangle. “Warning of a dangerous situation 
(Attention! Please follow the documentation).” 
The danger is classified using a signal word.  
Read and follow these important instructions.  
 

 

Warning

Describes a possibly highly dangerous situation. If these instructions are not 
followed, serious injury and danger to life could result. 
 

 

Caution: 

Describes a possibly dangerous situation. If this is not avoided, slight or minor 
injuries could result. A warning of possible property damage may also be 
contained in the text. 
 

 

Notice: 

Describes a possibly harmful situation. If this is not avoided, the product or 
anything in its surroundings can be damaged.

 

 
 
 
 

4.2. 

Explanation of other notes 

 

 

Note! 

Draws attention to something special. 
 

 

Important! 

Indicates usage tips and other useful information. 

 
 

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for FD200













Reviews: