Julabo FD200 Operating Manual Download Page 3

Operator responsibility – Safety instructions 

14 

 

Environmental conditions according to IEC 61 010-1: 

 

Use indoors only. 

 

Altitude up to 2000 m - normal zero. 

 

Ambient temperature: see Technical specifications  

 

Humidity: 

 

Max. relative humidity 80% for temperatures up to +31 °C, 

 

linear decrease down to 50% relative humidity at a temperature of +40 °C 

 

Max. mains voltage fluctuations of ±10% are permissible. 

 

Protection class according to IEC 60 529 

IP21 

The unit corresponds to Class I 

Overvoltage category  

II 

Pollution degree  

 

 

Caution: 

The unit is not for use in explosive environment. 

 
EMC requirements according to EN 61326-1 
 

Information about the used refrigerants 

The

  Regulation (EU) No. 517/2014 on fluorinated greenhouse gases 

applies to all 

systems which contain fluorinated refrigerants and replaces (EC) 842/2006. 
The aim of the Regulation is to protect the environment by reducing emissions of fluorinated 
greenhouse gases. 
Among other things it regulates the emission limits, use and recovery of these substances. It 
also contains requirements for operators of systems which require / contain these 
substances to function. 
 
Under Regulation 517/2014, the operator of a system of this nature has the following duties: 
 

  The operator must ensure that the equipment is checked at regular intervals for leaks. 

 

  These intervals depend on the CO

2

  equivalent  of the system. This is calculated from 

the refrigerant fill volume and type of refrigerant. The CO

2

 equivalent of your system is 

shown on the model plate. 
 

  The operator undertakes to have maintenance, repair, service, recovery and recycling 

work carried out by certified personnel who have been authorized by JULABO. 

 

  All such work must be documented. The operator must keep records and archive them 

for at least five years. The records must be submitted to the relevant authority on 
request. 

 
Refer to the text of the Regulation for further information. 
 

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for FD200













Reviews: