background image

Preparations 

14 

 

5. Preparations 

5.1. Installation 

 

Notice: 

Plexiglas and Makrolon baths are not resistent to solvents.  
Avoid contamination of the bath fluid with solvents.

 

 
Top view 

                 

A

 
 

  Place the circulator in an upright position. 

 
 
ED-5A / ED-5M 

  The circulator (A) mounted on a stainless steel bridge is 

placed on the back of the bath tank. 

 

A

B

 
 

 
ED-5  

  The circulator (A) mounted on a stainless steel bridge is 

placed on the back of bath tank. 
Close the bath tank with the bath cover (B). 

 
 
 
 
 

5.2.  

Bath fluids 

 

Caution: 

No liability for use of other bath fluids! 
Do not use flammable bath fluids! 
 

Water:  The quality of water depends on local conditions.  

  Due to the high concentration of lime, hard water is not suitable for 

temperature control because it leads to calcification in the bath. 

  Ferrous water can cause corrosion - even on stainless steel. 

  Chloric water can cause pitting corrosion. 

  Distilled and deionized water is unsuitable. Their special properties cause 

corrosion in the bath, even in stainless steel.  

Recommended bath fluids:  

 

Bath fluid 

Temperature range 

 

soft/decalcified water 

   5 °C to 80 °C 

Summary of Contents for ED-5
























Reviews: