ED
11
•
Do not stay in the area below the unit.
•
Make sure you read and understand all instructions and safety precautions
listed in this manual before installing or operating your unit.
•
Never operate the unit without bath fluid in the bath.
•
Check the filling level of the bath fluid from time to time. Pump and heater
must always be fully covered with the bath fluid!
•
The instrument is not suited for unsupervised continuous operation.
•
Do not drain the bath fluid while it is hot!
Check the temperature of the bath fluid prior to draining (by switching the
unit on for a short moment for example).
•
Observe the limited working temperature range when using plastic bath
tanks.
•
Employ suitable connecting tubing.
Make sure that the tubes are securely attached.
•
Never operate damaged or leaking equipment.
•
Always turn off the unit and disconnect the mains cable from the power
source before performing any service or maintenance procedures, or
before moving the unit.
•
Always empty the bath before moving the unit.
•
Never operate equipment with damaged mains power cables.
•
Some parts of the bath cover and the pump connections may become
extremely warm during continuous operation. Therefore, exercise particular
caution when touching these parts.
