EN
36
Guaranteed sound power
level.
Approved in accordance with
the relevant directives.
Recycle the product at
the end of its useful life
in accordance with local
regulations.
TECHNICAL DATA
Rated voltage
40 VDC
Trimming width
Ø 280 mm / Ø 330 mm
Trimmer line
Ø 1.6 mm
Sound pressure level, LpA 78.5 dB(A), K=3 dB
Sound power level, LwA*
94 dB(A), K=3 dB
Sound power level, LwA**
96 dB(A)
Vibration
<2.0 m/s², K=1.5 m/s²
*Measured, **Guaranteed
Always wear ear protection.
The declared vibration value, which has been
measured by a standardised test method, can
be used to compare different tools with each
other and for a preliminary assessment of
exposure. The measurement values have been
determined in accordance with EN 50636-2-
91:2014.
WARNING!
The actual vibration level when using power
tools may differ from the specified maximum
value, depending on how the tool is used.
It is therefore necessary to determine which
safety precautions are required to protect
the user, based on an estimate of exposure
in actual operating conditions (taking into
account all stages of the work cycle, e.g. the
time when the tool is switched off and when
it is idling, in addition to the start-up time).
DESCRIPTION
1. Speed control
2. Back handle
3. Lock button for speed control
4. Front handle
5. Handle, top part
6. Handle coupling
7. Handle, bottom part
8. Guard
9. Lever for working width
10. Trimmer line
11. Rotation lock
12. Edge wheel
13. Battery
14. Charger
FIG. 1
ASSEMBLY
UNPACKING
• Carefully remove the product and all the
accessories from the packaging. Check
that all the parts are included and are
undamaged.
• Check the product and all the accessories
for transport damage.
• Do not discard the packaging material
before you have checked and used the
product.
WARNING!
• Do not use the product if any parts are
missing or damaged – risk of serious
personal injury.
• Do not make any modifications to the
product. Never use accessories that are
not recommended by the manufacturer.
Any modifications to the product are
Summary of Contents for Meec tools 011221
Page 4: ...4 1 5 2 3...
Page 5: ...6 7 8 9...