Jula MEEC TOOLS 009875, Operating Instructions Manual

Page: 41 / 43

EN
41
MAINTENANCE
TRANSPORT
IMPORTANT:
• Risk of personal injury and/or material
damage.
• Take the weight of the product into
consideration when transporting.
Transporting by hand
• Switch off the product, disconnect the
water supply and pull out the plug.
• Pull out the transport handle until it locks
in place with an audible click. Use
transport protection where appropriate.
• Always hold the product with the
transport handle.
Transport with vehicle
• Put the lid on the detergent bottle if the
high-pressure washer is to lie flat when
transported.
• Tilt the high-pressure washer towards you so
that it balances on the wheels and move it
by using the transport handle.
• Protect the high-pressure washer from
vibrations and knocks during transportation.
• Make sure that the high-pressure washer
cannot move or tip over when it is
transported.
Storage
IMPORTANT:
• Risk of personal injury and/or material
damage.
• Take the weight of the high-pressure
washer into consideration when putting
it away.
1. Place the high-pressure washer on a level,
stable surface.
AFTER USING DETERGENT
1. Release the detergent bottle from the
inlet and put the lid on.
2. Replace the detergent bottle in the
storage position with the lid up.
DURING A PAUSE IN THE WORK
1. Release the trigger.
2. Lock the spray gun with the catch.
3. Put the spray gun with the spray head in
the storage position.
4. Switch off the high-pressure washer with
the power switch if it is not going to be
used for 5 minutes or more.
AFTER FINISHING THE WORK
1. Release the trigger.
2. Switch off the high-pressure washer with
the power switch.
3. Pull out the plug.
4. Release the pressure from the high-
pressure washer before removing the
pressure hose from the spray gun or the
washer.
5. Press the trigger to release any residual
pressure in the system.
6. Release the trigger.
7. Lock the spray gun with the catch.
8. Disconnect the water supply from the
high-pressure washer.
NOTE:
Hot water can run out after using the high-
pressure washer when the supply hose or
high-pressure hose are disconnected.