Jula MEEC TOOLS 009875, Operating Instructions Manual

Page: 39 / 43

EN
39
place.
FIG. 7
7. Connect the other end of the high-
pressure hose to the water outlet and lock
by twisting the black end piece as shown
in the diagram.
FIG. 8
8. Connect the water hose adapter (female
connection) to the water inlet on the
high-pressure washer and connect the
water hose (male connection) to the
water hose adapter.
FIG. 9
USE
Place the high-pressure washer on a level,
stable surface and plug in the plug.
WATER SUPPLY
NOTE:
The temperature of the ingoing water must
not exceed 40
°C.
Fresh water
The water can be supplied from the water
mains or from an open source.
Open source
The high-pressure washer can be used with a
suction hose with a check valve to take water
from a barrel, or pond.
NOTE:
Impurities in the water can damage the high-
pressure pump and accessories.
1. Fill the suction hose with water.
2. Connect the suction hose to the water
inlet on the product and put the other
end in the water (e.g. rainwater barrel).
DESCRIPTION
1. Handle
2. Spray gun
3. Cord holder
4. Power switch
5. Front casing
6. Power cord
7. Water inlet
8. High-pressure hose holder
9. Spray gun holder
10. High-pressure hose
11. Spray head
12. Nozzle
13. Spray head holder
14. Wheel
15. Water outlet
FIG. 1
ASSEMBLY
1. Put the handle in place and screw tight.
FIG. 2
2. Press the spray gun holder in place on
the side of the handle as shown in the
diagram.
FIG. 3
3. Press the cord holder in place on the side
of the handle as shown in the diagram.
FIG. 4
4. Fit the wheels.
FIG. 5
5. Fit the spray head in the spray gun and
twist to lock in place.
FIG. 6
6. Connect the high-pressure hose quick-
coupling to the spray gun and press in