EN
34
Always wear ear protection.
The declared vibration value and noise, which
have been measured by a standardised test
method, can be used to compare different tools
with each other and for a preliminary assessment
of exposure. The measurement values have been
determined in accordance with
EN 50580:2012+A1.
WARNING!
The actual vibration and noise level when
using tools may differ from the specified
maximum value, depending on how the
tool is used and the material. It is therefore
necessary to determine which safety
precautions are required to protect the user,
based on an estimate of exposure in actual
operating conditions (taking into account all
stages of the work cycle, e.g. the time when
the tool is switched off and when it is idling,
in addition to the start-up time).
DESCRIPTION
FUNCTION AND TECHNIQUE
The spray gun sprays at low pressure. The
jet is formed at low pressure and with a
large volume of air. The nozzle produces
a very fine dispersion and minimum mist.
The surface treatment product is applied
quickly and precisely on the object. The air
flow also shortens the drying time for the
surface treatment product. This produces
optimum results with a smaller amount of the
surface treatment product, which reduces the
environmental impact.
1. Nozzle
2. Paint container
3. Switch
4. Handle
– Maintain and lubricate the tool in
accordance with these instructions.
SYMBOLS
The symbols below provide information on how
the power tool should be used. Make sure you
understand the symbols and their significance.
Read the instructions.
Approved in accordance with
the relevant EU directives.
Wear safety glasses.
Wear ear protection.
Wear a face mask.
Recycle as electrical waste.
TECHNICAL DATA
Operating voltage
18 VDC
Container volume
750 ml
Weight
1.8 kg
Sound pressure level, LpA 81.1 dB(A), K = 3 dB
Sound power level, LwA 92.1 dB(A), K = 3 dB
Vibration level, ah
1.82 m/s², K = 1.5 m/s²
Summary of Contents for Meec tools 007587
Page 4: ...1 1 3 4 5 2 6...
Page 5: ...2 3 4 A A B B...
