SE
46
GB
• We recommend storing the tool in the pack, or otherwise protected from dust.
Transport
• Switch off the product, unplug the power cord and wait until all moving parts have completely stopped
before transporting the tool.
• Protect the tool during transport if necessary.
• Always hold the tool with the grips.
• Do not expose the tool to knocks, blows or vibrations.
• Secure the tool so that it cannot drop.
TROUBLESHOOTING
The troubleshooting guide will help you identify the causes of common problems and how they can be
rectified. Contact your dealer if you experience a problem that is not included in this troubleshooting guide.
WARNING!
Do not carry out any measures other than as described in these instructions. Contact your
dealer if you cannot solve the problem with the troubleshooting schedule.
Problem
Possible cause
Action
The tool will not start.
The power cord is not plugged in.
Plug in the power cord.
The power cord or plug is damaged.
Contact an authorised electrician.
Other electrical fault on the tool.
Contact an authorised electrician..
The tool does not
work at full power.
Unsuitable extension cord.
Use a suitable extension cord.
Voltage too low (e.g. when using
generator).
Use an other power source.
Blocked ventilation openings.
Clean ventilation openings.
Screws do not screw in
properly.
Bit worn.
Use another bit.
Unsuitable bit.
Use a suitable bit.
Summary of Contents for Meec TOOLS 000-128
Page 47: ......