SE
44
GB
Speed control
• The speed increases the more the power switch (5) is pressed.
Fig. 4
Rotation selector
The tool has a rotation selector (7).
WARNING!
Always allow the tool to stop completely before changing the direction of rotation.
• Move the selector to position
for right drive and to position
for left drive (fig. 5). The
middle position locks the tool in the Off position.
Fig. 5
Before use
• Check the tool, power cord, plug and all accessories for transport damage. Do not use the tool if it is
damaged.
• Always check before use that all the accessories are correctly fitted.
• Always hold the tool with the grips. Keep the grips clean, dry and free from oil and grease.
• Do not block the ventilation openings on the tool – risk of overheating.
• Keep other people, especially children, and pets at a safe distance from the work area. Switch off the
tool and wait until all moving parts have completely stopped before putting down the tool.
• Use suitable safety equipment and take regular pauses.
Screw driving
• Set the rotation selector (7) to the position for right drive.
• Place the screw against the bit and press the tip of the screw firmly against the surface. Press the
power switch.
Summary of Contents for Meec TOOLS 000-128
Page 47: ......