EN
54
1.
Make sure the power switch is in the OFF position (diagram 8).
2.
Check that the mains voltage corresponds to the rated voltage on the type plate.
Plug in the power cord.
3.
Open the water tap fully.
4.
Release the trigger lock by pushing it up (diagram 9).
5.
Keep the trigger pressed for a few seconds to remove any air and relieve the pressure in the hose.
6.
Keep the trigger pressed and then put the switch in the ON position to start the motor.
8
9
Trigger lock
Summary of Contents for HAMRON 220-155
Page 58: ......