EN
11
INSTALLATION
Read the operating instructions carefully before use.
Save them for future reference.
Install on a soft surface
1.
Dig a sufficiently large and deep hole (1).
2.
Fill the hole with concrete (2).
3.
Screw the four legs to the cast anchor plate to ensure that they are at the correct distance
from one another when cast.
NOTE:
On delivery the cast anchor plate is mounted on the
bottom of the free-standing post box. Press down the ground-mount (legs + cast anchor
plate) to a suitable depth in the concrete before it sets.
4.
Finally, check using a spirit level that the ground-mount is level (4). Wait for the concrete to set.
Operating instructions for
free-standing post box
ENGLISH