ENGLISH
34
3.
Align the hole in the ejector unit with the hole in the cover. Insert the screw and tighten with a
screwdriver.
Fitting the crank for the ejector unit
1.
Take out the upper and lower parts of the crank for the ejector unit from the bag with the parts.
2.
Undo the screw and nut on the upper part.
3.
Align the screw holes to each other and insert the upper part into the lower part. Insert a screw and
screw on a nut. Tighten with a screwdriver and spanner.
4.
Undo the screw, washer and nut on the coupling. Insert the screw through the hole in the ejector
unit. Tighten with a screwdriver and spanner.
Summary of Contents for 721-111
Page 37: ......
