ENGLISH
13
1.
Heat the soldering station to the required operating temperature. Then place the soldering tip and
solder at the soldering point. The solder paste melts first in order to clean the metal surface to be
soldered. The solder then melts away in order to create an electrically conductive connection point.
It takes no more than two seconds to solder electronic components.
2.
Good soldering produces a joint that is even and shiny once the solder has cooled. Poor soldering
(on account of one or more mistakes) produces a joint that is uneven, dull and cracks easily. Poor
soldering results may be caused by using the wrong solder or by setting the soldering temperature
too high. Another common cause is too short or too long a soldering time. The soldering point must
not be heated for too long, nor may the soldering iron be removed from the soldering point too
early. The soldering iron must be removed once the solder has melted into an even, shiny silver
form.
3.
When soldering is complete, melt a little solder on the soldering tip before you return the soldering
iron to the holder, then shut off the soldering station. Clean the soldering tip using a wet sponge in
order to remove excess solder before you next start soldering.
TECHNICAL DATA
Mains voltage
220 – 240 V/50 Hz
Rated output
48 W
Temperature range
150ºC – 450ºC
Built-in mains fuse
T 1 A / 250 V (glass tube 50 x 20 mm)
Safety class
I
LCD display
2 x 3 ½ degrees, display range: 150ºC –
450ºC, accuracy: 5%
Operating conditions
Ambient temperature: 5ºC – 40ºC, ambient
humidity: <85% non-condensing
Atmospheric pressure
600 – 1000 hPa
Dimensions (w x h x d)
195 x 87 x 165 mm (ex. soldering iron)
Weight
approximately 2 kg
NOTE!
Do not use the soldering station if the power cord or plug is damaged in any way. For safety
reasons, the power cord may only be replaced or repaired by an authorised service centre. Consult your
dealer.
Subject to printing errors and design changes over which we have no control. In the event of problems,
please contact our service department.
Jula Postorder AB, Box 363, SE-532 24 SKARA, SWEDEN
www.jula.com
Summary of Contents for 213-021
Page 14: ......
