EN
23
TECHNICAL DATA
Gas and supply pressure
Butan/Propan 30 mbar
Appliance category
I3B/P(30)
Injector size Ø
0.91 mm
Total nominal heat input
10.8 kW / 785.5 g/h
Lighting Integrated
Grill surface
58 x 44.5 cm
DESCRIPTION
1. Grill
1
2. Warming
rack
1
3. Grill
rack
2
4. Flame
guard
3
5. Side
shelf
2
6. Bracket, side shelf
4
7. Crossbar,
front
1
8. Left back leg
1
9. Front left leg
1
10. Wheel
axle
1
11. Wheel 2
12. Wheel
face
2
13. Drip
tray
1
14. Bottom
shelf
1
15. Back right leg
1
16. Front right leg
1
FIG. 1
ASSEMBLY
NOTE:
Some components have sharp edges/corners. Handle all parts
carefully to avoid cutting yourself. Wear safety gloves.
• To assemble you need a screwdriver and spanner.
• Remove all the parts from the packaging and sort before
assembly.
• Assemble the grill on a level surface.
• See diagrams for correct order of assembly.
FIG. 2
FIG. 3
FIG. 4
FIG. 5
FIG. 6
FIG. 7
FIG. 8
FIG. 9
USE
Preparations
• To use the product you need a gas cylinder and suitable gas
regulators. The regulators must comply with the current
edition of EN16129 and applicable national regulations.
• Before cooking the food connect the regulator to the gas
cylinder valve and firmly tighten.
Tips for saving gas
• Open the lid as little as possible and as briefly as possible.
• Turn off the product as soon as you have finished cooking.
• Preheat the grill for no more than 10–15 minutes (except
when using for the first time). Do not preheat for longer
than recommended.
• Do not use a higher setting than recommended.
Connecting the gas cylinder
NOTE:
Gas cylinder and regulator sold separately.
• Place the grill on a level, stable surface. Check that the inlet
and outlet regulator suits the gas cylinder valve and the
product.
• If the regulators are kept outside, protect them from
precipitation, etc.
• A spanner is needed to connect the gas cylinder.
• Check that the hose is not clinched or twisted when
connecting.
• Place the gas cylinder on the left side of the product, in a
safe place protected from heat.
• The hose diameter must be 8–10 mm. The hose must not be
longer than 1.5 m.
1. Gas connection
2. Hose
3. Regulator
4. Gas cylinder
FIG. 10
NOTE:
Check the connections for leakage by using soapy water and
looking for bubbles.
WARNING!
•
Do not change gas cylinders near sources of heat. Place
the gas cylinder on the left side of the product, in a safe
place protected from heat.
•
Check all gas hoses for damage, leakage and/or incorrect
connection before use. Do not use the product if it any of
Summary of Contents for 004488
