INSTRUCTIONS
BORALITE BATTERY-POWERED
DRILL
PACKAGE CONTENTS
•
Charger
•
34-piece bit set
•
2× battery pack
•
Battery-powered drill
•
Case
TECHNICAL SPECIFICATIONS
•
Chuck design: keyless
•
Chuck size: 0.8
–
10 mm
•
No-load RPM: 0
–
350 / 0
–
1450
•
Rated torque: 36 Nm
•
Battery type: Li-ion
•
Battery capacity: 2000 mAh
•
Battery voltage: 21 V
•
Battery charging temperature: 10
–
40 °C
•
Charger adapter input: 100
–
240 V
•
Charging time: 1
–
2 hours
COMPONENTS
1.
Keyless chuck
2.
Torque selector
3.
Speed change switch
4.
LED work light
5.
Rotation switch and switch lock
6.
ON/OFF switch
7.
Battery pack
8.
Charger
HOW TO USE
CHARGING THE BATTERY PACK
1.
Plug the charger into the wall socket.
2.
Plug the power connector of the charger into
the charge socket on top of the battery pack.
•
Once the battery is completely charged, a
green light on the mains adapter lights up.
•
The device cannot be operated during
charging.
•
The charger and the battery heat up during
charging. This is due to operating conditions
and not a defect.
3.
Once the device has finished charging,
disconnect the charger from the battery charge
socket and the plug from the wall socket.
Charge state
Indicator light state
Charger plugged into
mains
Green on, red off
Charging
Green off, red on
After charging
Green on, red off
Battery abnormal
Green and red flicks
Battery temperature
below 10 °C or over 40 °C
Green off, red flick
INSTALLING A BATTERY PACK
CAUTION:
•
Always switch off the tool before installing or
removing the battery pack.
•
Hold the device and the battery pack firmly
when installing or removing the battery pack.
