SERVICE MANUAL
Date:
2011/09/23
Page:
26/39
Model:
K65&K85
2.
If needle clearance to shuttle at right and left position is not same, adjust position
of fulcrum (b) for needle swing support.
Loosen two screws (c) located under bottom of support plate and adjust position
of fulcrum (b).
3.
After adjustment, tighten two screws (c) securely.
b
b
C
C
b
b
If needle touches with shuttle at left side,
adjust position of fulcrum (b) for
needle swing support to the right.
If it touches at right side, adjust
position
of fulcrum (b) for needle swing
support
to the left.
