1. Place the thread and spool
cap onto the spool pin.
For smaller spools of thread,
place spool cap with the small
side next to the spool or use
the small spool cap.
2. Snap the thread into the
thread guide.
3. Wind the thread clockwise
around the bobbin winder
tension discs.
4. Place the thread end through
one of the inner holes in the
bobbin as illustrated and place
empty bobbin on the spindle.
5. Push the bobbin to right.
When the bobbin winder
spindle is pushed to the right,
which is the "bobbin winding
position", the symbol "
"
appears on the LCD screen.
It will disappear when the
bobbin winder spindle is
pushed to the left, which is the
"sewing position".
6. Hold the thread tail securely in
one hand.
7. Press on the foot control or the
Start/stop button to start
winding the bobbin.
8. After the bobbin has wound a
few turns stop the machine
and cut the thread near the
hole of the bobbin. Continue
filling the bobbin until it is full.
Once the spool is full, it rotates
slowly. Release the pedal or
stop the machine. Push the
bobbin winder spindle to left.
9. Cut the thread and then
remove the bobbin.
Winding the bobbin
Note:
- When the bobbin winder switch
is placed on the right "bobbin
winding position", the buttons
will not work. To start sewing,
push the bobbin winder switch
to the left "sewing position".
- If you find the bobbin winding
the thread unevenly, you can
adjust the height of the winder
tension disc (3) to improve it.
14
