– 21 –
4. Operating procedure of the sewing pattern
Refer to the Instruction Manual for each operation panel for how to operate sewing patterns us-
ing other operation panel than the built-in panel of the machine head.
[Setting procedure of the reverse feed stitching]
1) Effective/ineffective of the reverse feed stitching
pattern can be changed over by pressing
switch
❺
.
When the reverse feed stitching pattern is en-
abled, LED
Ⓔ
lights up and the display section
A
shows the number of reverse feed stitches at
the beginning of sewing and that at the end of
sewing.
Use and
switches
❾
to change the num-
ber of stitches for the target process (A, B, C or
D). (The number of stitches that can be set is 0 to
15.)
The numbers of stitches for processes A, B, C
and D are displayed on display section
A
from
left to right in the order from A to D.
(1) Reverse feed stitching pattern
Reverse feed stitching at sewing start and reverse feed stitching at sewing end can be separately pro-
grammed.
A
B
C
B
C
D
(2) Overlapped stitching pattern
Overlapped stitching pattern can be programmed.
A : Number of stitches of normal stitching setting : 0 to 15 stitches
B : Number of stitches of reverse stitching setting : 0 to 15 stitches
C : Number of stitches of normal stitching setting : 0 to 15 stitches
D : Number of times of repetition : 0 to 15 times
1. When process D is set to 5 times, the sewing is repeated as
A → B → C → B → C.
2. The number which exceeds 9 is indicated as follows:
A = 10, b = 11, c = 12, d = 13, E = 14, and F = 15.
[Setting procedure of the overlapped stitching]
1) Effective/ineffective of the overlapped stitching pattern can be changed over by pressing
switch
❻
.
When the overlapped stitching pattern is rendered effective, LED
Ⓕ
lights up.
2) Press
and
switches
❾
to change the number of stitches for target process (A, B, C or D).
2) Enable/disable of the reverse feed stitching at the beginning of sewing is set by pressing
switch
❶
.
Enable/disable of the reverse feed stitching at the end of sewing is set by pressing
switch
❷
.
Enable/disable of the double reverse feed stitching at the beginning of sewing is set by pressing
switch
❸
.
Enable/disable of the double reverse feed stitching at the end of sewing is set by pressing
switch
❹
.
The number which exceeds 9 is indicated as follows:
A = 10, b = 11, c = 12, d = 13, E = 14, and F = 15.
❶
❷
❸
Ⓗ
Ⓖ
Ⓕ
❾
❼
❻
❽
❹
❺
Ⓔ
Display section A
