– 25 –
3-11-6. Selecting the remaining thread removal motor speed
When you press
Ⓕ
on the AW setting screen, the remaining thread
removal motor speed selection screen is displayed.
On this screen, you can set the remaining thread removal motor
speed to either high speed or low speed.
▪
A
High speed: Standard
▪
B
Low speed: Speed is reduced to half of the standard speed.
<Remaining thread removal
motor speed selection screen>
In the case of using thin thread or fragile thread, the
remaining thread removal motor speed should be set to
the low speed.
3-11-7. Selecting the remaining thread removal air changeover (only supported as
an option)
When you press
Ⓖ
on the AW setting screen, the remaining thread
removal air changeover selection screen is displayed.
On this screen, the remaining thread removal air changeover can
be set to either standard or air consumption, small.
▪
A
Standard
▪
B
Air consumption, small
<Remaining thread removal air
changeover selection screen>
A
B
A
B
