LH-3128, 3128-7, 3168, 3168-7, 3178, 3178-7, 3188, 3188-7, 3120, 3120-7 (June, 2001) 1/12
LH-3128-7-WB/CP-160B
LH-3188-7-WB/CP-160B
LH-3120
●
The organized split needle bars which enable either the
left or right needle to stop independently of the other
can be changed over by simply operating the lever,
thereby saving labor in corner stitching.
LH-3168
LH-3168-7
(with an automatic thread trimmer)
2-needle, Needle-feed, Lockstitch Machine
with an Organized Split Needle Bar
●
The organized split needle bar mechanism makes it
possible to stop or reset the left or right needle by
operating a one-touch utility lever.
●
The machine produces neatly finished stitches at corner
parts of the material.
●
Improved thread tension and presser foot dramatically
upgrades the seam adjusting ability.
The range of thread counts that can be used is widened.
LH-3188
LH-3188-7
(with an automatic thread trimmer)
2-needle, Needle-feed, Lockstitch Machine
with an Organized Split Needle Bar and Large Hooks
●
The machine has adopted a bottom-feed mechanism. This enables
the machine to perform sewing with a low tension applied to the
material while preventing puckering and stitch skipping, thereby
improving consistency of seam quality.
●
The machine is capable of adapting to the sewing of light-weight
materials and newly-developed materials. This means that the
machine is exceedingly effective to the process to sew top center
plaits of shirts and the sewing of foundation.
LH-3120
LH-3120-7
(with an automatic thread trimmer)
2-needle, Bottom-feed, Lockstitch Machine
●
Our investigation of the thread take-up stroke and other
mechanisms results in the reduction of irregular stitches.
Even at high speed, the machine performs sewing as
consistently as the standard hook machine. The machine
can make the most out of the advantageous features of the
large hook, upgrading the finished quality of heavy-weight
materials and improving efficiency.
LH-3178
LH-3178-7
(with an automatic thread trimmer)
2-needle, Needle-feed, Lockstitch Machine with Large Hooks
2-needle, Needle-feed, Lockstitch Machine
LH-3128
LH-3128-7
(with an automatic thread trimmer)
●
The tension applied to the bobbin thread has been reduced
and the needle thread path has been thoroughly renovated
to achieve highly consistent feed of the needle thread.
Puckering, stitch skipping, thread breakage and isolated
idling loops can be therefore prevented, enabling the
machine to produce beautifully finished seams with
consistency.
●
After the gauge has been replaced, the machine can be
adapted to the newly installed gauge only by adjusting the
clearance provided between the blade point of the hook
and the needle. In this case, it is not necessary to change
the hook timing in accordance with the gauge. As a result,
the length of time required to replace the gauge is
dramatically reduced.
2
Summary of Contents for ACF-164-1903
Page 1: ......
