JUKI ACF-164-1903, Handbook

Page: 160 / 272

MEB-3200SS, 3200RS, 3200RD, 3200JS, 3200CS (June, 2001) 1/4
MEB-3200RS
MEB-3200SS
Model name
Application
Thread trimming style
Table stand
Stitch system
Max. sewing speed
Sewing length
Stitch bite width
(at the time of delivery)
Taper bar length
Work clamp height
Method for changing stitch shape
Buttonhole cutting method
Feed system
Method to drive the cloth-cutting knife
Needle
(at the time of delivery)
Lubrication
Lubricating oil
Compressed air and air consumption
Power requirement and
power consumption
Dimensions
Total weight
SPECIFICATIONS
●
An active tension mechanism (computer-controlled thread tension
mechanism) that electronically controls the needle and looper thread
tensions.
Needle and looper thread tensions can be digitally established on the
operation panel according to sewing conditions. Data can be
registered on a pattern-by-pattern basis to easily reproduce the same
sewing conditions.
Thread tensions can be separately established for various sections of a
buttonhole such as eyelet sections and parallel sections.
●
The knife is controlled by a stepping motor. This enables easy
adjustment of the knife pressure on the operation panel to suit the
material to be used, thereby preventing irregular cutting.
Selection between the cut-before knife and cut-after knife can be made
on the operation panel.
●
The right and left work clamps are separately driven by independent air
cylinders. With this mechanism, the work clamps reliably clamp
materials of different thicknesses to prevent the materials from flopping.
●
JUKI has newly developed a machine head with a shallow recess.
For the efficient sewing of longitudinal buttonholing.
●
The computer controlled design eliminates most of the complicated
mechanisms. This dramatically improves maintainability.
MEB-3200SS
(for men's and ladies' wear)
MEB-3200RS
MEB-3200RD
MEB-3200JS
(for jeans)
MEB-3200CS
(for cotton pants and working wear)
Computer-controlled, Eyelet Buttonholing Machine
with a Trimmer for Needle and Looper Thread with Gimp
(for combined use for lateral and longitudinal buttonholing:
for men's and ladies' wear)
(for combined use for lateral and longitudinal buttonholing:
for men's and ladies' wear, lateral-installation machine head)
MEB-3200SS MEB-3200RS MEB-3200RD MEB-3200JS MEB-3200CS
For men's and For combined use for lateral and longitudinal
For jeans
For cotton pants
ladies' wear buttonholing: for men's and ladies' wear and working wear
Longer remaining thread Shorter remaining thread
Standard Standard
Lateral-installation
Standard Standard
machine head
1-needle, double chainstitch (with a gimp)
400 〜 2,200rpm (100rpm step)
2.0
〜
3.2mm
(2.3mm) (2.3mm) (2.3mm) (2.5mm) (2.5mm)
0mm, 3
〜
15mm
13mm (max. 16mm)
By selecting a program
By cut-before knife or cut-after or without buttonhole cutting
Intermittent feed by a stepping motor
Vertically driven by stepping motor
D0
×
558 D0
×
558 D0
×
558
(Nm100) Nm90 〜 Nm110 (Nm120) Nm120 〜 Nm130 (Nm110) Nm110 〜 Nm120
Automatic (looper and spreader: by an oiler)
JUKI New Defrix Oil No.2 (equivalent to ISO VG32)
0.5MPa (5kgf/cm
2
), 6N /min (8cycle/min)
Single- /3-phase, 550VA
1,060mm (W)
×
790mm (D)
×
1,230mm (H)
185kg
Work clamp type S Work clamp type S
16 〜 24 (26)mm: optional 16 〜 24 (26)mm: standard
Work clamp type M Work clamp type M
24
〜
32 (34)mm: standard 24
〜
32 (34)mm: optional
Work clamp type L Work clamp type L
32 〜 40 (42)mm: optional 32 〜 40 (42)mm: optional
The figures in ( ) parentheses are in case of taper bar
10 〜 38mm (with thread trimmer)
10 〜 50mm (in case looper thread trimming device is removed)
＊ By selecting the left looper and left spreader, the range of stitch bite can be changed to 2.6 〜 4.0mm from 2.0 〜 3.2mm
9