background image

BATTERY MAINTENANCE

MOVEMENTS CONTROL

FLIGHT SPEEDS

UP AND DOWN

LEFT AND RIGHT TURNS

LATERAL MOVEMENTS

FORWARD AND BACKWARD

1. The battery must be placed in a dry and ventilated area at a room temperature between 

18 and 25° C.
2. In order to extend battery life, avoid making repeated charges or excessive discharges.
3. When storing the battery for a long time, charge the battery first and store it with at least 

50-60% of the total allowed charge.
4. If you are not going to use it for more than a month, it is highly recommended that you 

measure the voltage of the battery every month to ensure that this does not fall below 3V. 

Otherwise, repeat step 3.

Lift the power lever (left) for the drone to 

go up.
Lower the power lever (left) for the drone 

to go down.

For you to make progress and start controlling the drone, you 

can increase the difficulty level. The VR Nanodrone HD counts 

with a three-speed selector: low, medium, and high.
The speed can be selected by pressing the lower cursor, as the 

lateral picture shows it.

Move the power lever (left) to the 

right or left for the drone to turn to the 

corresponding side.

Move the steering lever (right) to the 

right or left for the drone to move to the 

corresponding side.

Lift the steering lever (right) for the drone 

to go forward.
Lower the steering lever (right) for the 

drone to go backward.

Summary of Contents for VR HD NANO DRONE













Reviews: