Hard Reset:
When the drone flies uncontrollably and it is impossible to fix those flight mistakes, the best
option is to re-establish it to factory settings. This will make the drone have the factory settings
it had when you bought it.
Follow these steps in order to perform the hard reset:
4. Place the drone on a
horizontal and flat surface and
move the right and left levers
on the left bottom corner of
the transmitter for 2-3 seconds. The LED indicator will change
from permanent light to fast blinking.
2-3 seconds after the LED indicator goes back to permanent
light, the drone will be restored correctly.
3. When the LED of the drone starts blinking fast, move the
power lever (left) up and down. The LED of the drone will start
blinking slowly and then the LEDs will remain fixed.
Total control function:
While the drone is functioning in normal mode, without total control, the pilot will have to
control the front and back parts of the drone as well as the lateral parts in order to give
the right movement orders during the flight. In this flight mode, you need to know that the
controls will be inverted when the drone goes back to you. The VR Nanodrone HD integrates
a total control system which makes it easier to pilot.
ACROBATIC MODE:
Once you have controlled the flight and the basic functioning of
the drone, you will be ready to make some impressive tricks and
acrobatics.
First of all, you have to fly higher than 3 meters because all
acrobatics involve a loss of height, and that way you will avoid the
danger of crashing against the floor.
To perform the acrobatics, you have to press the button “acrobatics”
(it is on the right front part) and then, push the direction lever (right)
towards the desired direction to perform the 360º acrobatics.
When total control is activated, the drone orientation does
not affect movements because the drone will move in relation
to the position the pilot is and not in relation to the drone’s
orientation.
To activate total control mode, press the button showed on the
right picture.
Press it again in order to deactivate it.
1. Turn on
the drone.
2. Turn on
the transmitter.
ON
off
CHA
ADVICE ON THE ACROBATICS FLIGHT MODE:
Make sure to have enough battery at the moment of performing the acrobatics.
