14
1.
If setting up the machine for baseball use, connect
Baseball Leg Extensions
to the
Short Softball Legs,
by squeezing QUICK-SNAP
®
buttons and sliding the
pieces together. Be sure the QUICK-SNAP
®
buttons
spring back up securely inside the lock holes.
(If setting
up for softball use, skip this step and move to step 2.)
2.
Insert all three legs into
Base
using the QUICK-SNAP
®
buttons. Be sure the QUICK-SNAP
®
buttons spring back
up securely inside the lock holes.
3.
Standing behind the machine (2 legs in front, 1 leg in
back), attach the
Machine-Mount Bracket
to the
Base
by threading the the
Vertical-Adjustment Knob
through
the right side and into the nut on the left side. With the
Base
level, tighten the
Vertical-Adjustment Knob
.
4.
Place the
Machine
on the
Machine-Mount Bracket
with control panel facing rear leg. Thread the
Machine-
Mount Knobs
through the
Machine-Mount Bracket
holes and tighten.
5.
Attach the
Plexi Feed Chute
to the
Machine
using
two
7/8" screws
. Tighten the screws with a Phillips
screwdriver.
6.
Slide the
Feed-Chute Bracket
onto the
Plexi Feed
Chute
and align the bracket with the two holes on top of
the
Machine
. Insert and tighten both
1/2” Screws
with a
Phillips screwdriver.
7.
Slide the
Plexi Feed-Chute Extension
into the
Feed-Chute Bracket
.
RECOMMENDED ASSEMBLY STEPS
