JUDO PROFIMAT-PLUS
7
Intended use
2.
Intended use
The installation and operation of the auto-
matic backwash protective filter is subject to
the following existing national regulations.
In addition to the operating instructions and
the obliging regulations concerning accident
prevention that exist in the country of opera-
tion and the location of use, the established
technical regulations concerning safe and
professional work, should also be observed.
The water which is to be treated should
fulfil the requirements stipulated by
European drinking water directives!
It is absolutely essential that the manufac-
turer / supplier will be consulted prior to any
operation of the device using water of a
different quality, respectively with water that
contains additives.
This automatic backwash protective filter is
suitable for use in cold drinking water up to
a maximum ambient temperature of 30 °C
(86 °F).
The automatic backwash protective filter
has been developed and manufactured
using state of the art technology and the
established safety regulations in Germany.
The automatic backwash protective filter
may only be operated in accordance with the
manufacturer’s specifications. Any other
operation or operation beyond the specified
use, is not in accordance with the manufac-
turer’s specifications.
Additional dangers may result in the event of
the device not being operated in accordance
with the manufacturer’s specifications and
non-observance of the danger symbols or
safety instructions. The manufacturer /
supplier cannot be made liable for any
damages caused by these additional
dangers. The operator is responsible for
these risks.
The use of the device in accordance with the
customer’s specifications includes the
observance of the operating instructions.
The manufacturer/supplier should be con-
sulted prior to any operation of the automatic
backwash protective filter other than in the
operational areas stated in these operating
instructions.
The automatic backwash protective filter
may only be operated in a technically fault-
less condition, in accordance with the manu-
facturer’s specifications and the stated
safety and danger relevant instructions and
under observance of the operating instruc-
tions!
Any functional defects are to be removed
immediately!
