Product information
8
JUDO JUKO-LF
1701430 • 2018/11
Assessment of Organic Materials in Contact
with Drinking water) of the German Fed-
eral Environmental Agency (UBA) W 270.
Metallic materials fulfil the requirements of
DIN 50930-6.
2.4
Approval marks
The device complies with the technical
regulations for drinking water installation
according to DIN EN 806ff. and the national
supplement DIN 1988ff. as well as DIN EN
1717.
It has been tested and certified by the
DVGW (Deutsche Vereinigung des Gas-
und Wasserfaches e. V. - Technisch-wis-
senschaftlicher Verein) in accordance with
the requirements
• of the DIN EN 13959 for backflow pre-
venters
• of the DIN EN 1567 (pressure range
PN 16) for pressure reducers
• of the DIN EN 13443-1 and DIN 19628
for mechanically active filters.
The device bears the DIN-DVGW mark as
proof of certification.
3
Installation
CAUTION
The device may only be installed
by qualified technical personnel.
Installation of the device upstream of the
water meter is forbidden.
3.1
Conditions
CAUTION
Risk of property damage or water
damage!
The pipe must be able to safely
support the device (weight: see
chapter 7). If necessary, the pipes
must be provided with additional
fastenings or support.
To ensure convenient operation and main-
tenance of the device, always adhere to
the specified clearances (see chapter
3.4.1). The space above and below the filter
should be approximately 200 mm to ensure
proper operation and maintenance of the fil-
ter.
