JUDO JUKOMAT-LongLife
19
Operation
The relay can be connected as a break con-
tact or as a make contact. If the Domestic
Water station's power supply unit is plugged
in the relay changes its switched condition.
If a fault message occurs the relay switches
to the de-energised condition shown in the
diagram.
5.7.2 Servicing / Repair
Before carrying out any work on the Domes-
tic Water, which extends beyond pure oper-
ational control, the Domestic Water must be
depressurised! Failure to observe this can
lead to an uncontrolled escape of water and
therefore lead to water damage in the build-
ing. Strictly comply with the instructions giv-
en in the “Installation” and “Maintenance”
chapters.
5.8
Stoppages
ATTENTION
(see chapter “Safety information and dan-
gers due to non-compliance”)
If a Domestic Water station has to be re-
moved from the flange or unscrewed, the
chapter "Intended use" must always be ob-
served!
–
Protect the flange surfaces from dam-
age! Damaged flanged surfaces cannot
close tight. As a result, escaping water
can damage the building and installa-
tions.
–
Ensure that no dirt can get into the Do-
mestic Water station! This dirt can get in-
to contact with and be discharged into
the drinking water when the Domestic
Water station is switched back on. The
health of people who drink dirty water is
at risk.
–
Store the Domestic Water station in
frost-free conditions! Frost can cause
any water contained in the Domestic
Water station's voids to freeze and thus
cause mechanical damage to the Do-
mestic Water station so that it leaks at
operating pressure or can burst. Leaking
water can cause major damage to the
building. In addition, people near the Do-
mestic Water station can be injured by
breaking off filter parts.
–
When restarting the Domestic Water sta-
tion, follow the instructions for a new Do-
mestic Water station.
