JTS UF-10R, Product Manual, Page: 42 / 48

38
7.RF Power: set transmission power
(1) Press , keys to RF Power; press SET to enter into “RF Power” screen;set
transmission power.
(2) Press , keys to select transmission power as Hi or Low; press SET key
to save setting.
Attention: if setting is Hi, the RF signal is stronger while microphone consumes
more power.
Note: Hi represents 50 mW and Low 10 mW.
8. Contrast: adjust screen contrast
(1) Press , keys to Contrast; press SET to enter into “Contrast” screen ;
adjust screen contrast.
(2) Press , keys to adjust contrast; higher number represents higher
contrast ; otherwise, lower contrast; -3 ~ 0 ~ +3 total seven adjustable levels.
9.Light T.: set screen backlighting time
(1) Press , keys to Light T.; press SET to enter into “Light T.” screen; set
screen backlight time.
(2) Press , keys to select backlight time 3 options available; Always OFF
(shut off), 5~30Sec (5 Sec as unit change), Always ON (always on).
The longer screen backlight time, the shorter battery life.
RF Power
Contrast
Light T.
Name
RF Power
Hi
Low
Contrast
Light T.
Name
Key Lock
Contrast
0
Light T.
Name
Key Lock
Exit
Light Time
30 Sec.