JTS UF-10R, Product Manual, Page: 36 / 48

32
Device ID
0
ID:OFF
Device ID
0
ID: ON
Remote Set
ON
OFF
RF Power
Hi
Low
5. ) Device ID: set device ID
(1) Press , keys to Device ID; press SET key to enter into “Device ID”
setup screen.
(2) Press , keys to adjust default ID between 0 and 255; press SET key to
switch to set ID: ON/OFF.
ID: ON → only if microphone ID and receiver ID are the same, REMOSET
function can work.
ID: OFF → regardless of ID, the transmitter will accept REMOSET data from
all receivers of the same band and with ID Off.
The setting will affect the use of REMOSET.
6.) Remoset: set Remoset function on/off
(1) Press , keys to Remoset; press SET to enter into “Remoset” setup
screen.
(2) Press , keys to select ON or OFF; press SET key to save setting.
Setting ON: Remoset function available.
Setting OFF: disenable Remoset function; and saves microphone power.
7.) RF Power: set transmission power
(1) Press , keys to RF Power; press SET to enter into “RF Power” screen;
set transmission power.
(2) Press , keys to select transmission power as Hi or Low; press SET
key to save setting.
Attention: if setting is Hi, microphone consumes more power.
Note: Hi represents 50 mW and Low 10 mW.
Device ID
Remoset
RF Power
Contrast
Remoset
RF Power
Contrast
Light T.
Remoset
RF Power
Contrast
Light T.