22
(2) When microphone receives data, microphone indicator lamp shows blue light for 5
seconds, while receiver blue light stops flashing, indicating the REMOSET has been done
successfully . (Fig. 2)
(3) Receiver blue light flashes slowly, indicating REMOSET failure, please check it:
1) Whether “frequency range labels” attached on receiver and microphone are the same.
2) “REMOSET” selection in microphone function menu needs to be set “ON”.
3) Device ID for receiver and microphone should be paired.
Refer to receiver setup method:
4. Menu function setup “6. Device ID: set device ID”
Refer to handheld transmitter setup method:
6. Menu function setup “4. Device ID: set device ID”
3. Menu function setup:
Press Setup key for 2 seconds to enter menu screen
(1) Turn jog dial to make desired selection; press Setup key or press jog dial to enter setup
screen; press Exit key to leave menu.
(2) After entering into menu screen, turn jog dial to select default item; press Setup key or press
jog dial to enter into menu screen.
(3) After selecting the desired item, turn jog dial to obtain desired value; press Setup key to save
the setting.
Fig. 2
24
Summary of Contents for UF-10R
Page 2: ...UF 10TH UF 10TB UF 10R UHF PLL Product manual...
Page 48: ...44...