JTS IT-12D, User Manual

Page: 9 / 24

INTERPRETATION SYSTEM
4
2-2 Interpreter Console // IT-12D
30 30 28 29 31 32
REC OUT
MIC IN
EARPHONE
A
MIC IN
REC OUT
B
EARPHONE
INPUT MIC INPUT
+48V PHANTOM POWER
MIC INPUT
+48V PHANTOM POWER
SET
OFF ON
OUTPUT
ENTER
COUGH CUT MIC.A ON/OFF MIC.B ON/OFF COUGH CUT
VOLUME A
MONITOR
6
1
2
3
4
5
10
9
8
7
11
MONITOR
6
1
2
3
4
5
10
9
8
7
11 VOLUME B
1 2 3 4 5 6 7 8 9 10 11
MICROPHONE OUTPUT CHANNEL
SLOW
ORIGINAL RELAY RELAY ORIGINAL
20 19
22
24
26
27
25
23
21
22
33
34
35
24
26
25
23
21
33
34
35
ENTER key : At Lock Mode to set the active channel of interpreter console. When
switch on Switch the ENTER indicator starts flashing. After push one of the selectable
channels (from CH1 to CH11 with Light On) this active channel can be stored to this
interpreter console by pushing the ENTER key. Then switch off the Switch to end
the procedure.
At OPEN Mode to clear the active channel of interpreter console. when interpreter want
to close all channel of this interpreter console , then push the ENTER key to close active
channel. In this time , all of channel indicator are off like power on initially state .
CH1~CH11 Channel Output Key:
• MODE switch at LOCK position: Under setting state, press it to select a selectable chan-
nel (indicator on) for interpretation output. Only 1 channel can be set in one Interpreter
Console. The indicator of the activate channel is in green.
• MODE switch at OPEN position: All of channel indicator are off when power on
initially. All channels are open to interpreter as long as it is not occupied by others. When
the channel is activated the Channel Output Key is in green. The indicator flashes in red
which means this channel is in use by others.
Note: MIC. ON/OFF at OFF state, the activate channel will be released
when this channel number on other interpreter console is selected.
19 28
28
20
MODE
LOCK OPEN