www.modellmarkt24.ch
The final piece used for carbon fiber bracing will be the
rod used at the front of the airframe. Make sure that the fuselage is straight
while these pieces are setting.
You can now locate the final long control horn and glue it into the slot on the
side of the rudder. This will be used for the rudder linkage that will be
constructed in the same way as the one used for the elevator. Once again, the
length for that linkage is 365mm. The guides for the rudder linkage will be
glued into the top of the vertical fuselage.
www.modellmarkt24.ch