www.modellmarkt24.ch
Now that the bottom fuselage piece is glued into place, you can locate the
carbon fiber rods used for the wing bracing. Shown above is the wing joiner
used to guide the wing bracing. Some airframes may have a larger gusset or
joiner that overlaps the leading edge. You will also find dots towards the tip of
each wing to determine where to glue the carbon rods. The same goes for the
location on the bottom part of the fuselage. There should be four total carbon
rods for wing bracing. Two will be used on each wing. Lengths can be found
on the carbon fiber diagram.
www.modellmarkt24.ch