V:\Mark\AP-F6 Operation Manual.doc
12
JST
AP-F6 PNEUMATIC CRIMPING MACHINE
Step 2.
Set the Adjust Switch to the UP
position.
Step 3.
Press the Tape-Feed button to
advance the tape until the first
terminal on the tape is located at the
crimping position.
Step 4, Temporary holding of terminal.
Set the adjust switch to the DOWN
position.
The ram moves down and rests on
top of the terminal, and holds it firmly
in position.
The terminal is now ready for
crimping.
5. OPERATION
5.1 Touch Sensor operation.
Step 1.
Turn the Touch Sensor ON.
