- 17 -
INSPECION OF THE WELD
When the blade is removed from the
welder
it
should
be
inspected
carefully.
The spacing of the teeth should be
uniform and the weld should be
located in the center of the gullet.
Major jaw misalignment is easily
noted at this time from the weld
appearance. See the trouble shooting
chapter if the weld is imperfect.
▲CAUTION: This welder is designed for intermittent use. Repeated welding
within a short period of time may cause the welder to overheat.
TROUBLE SHOOTING
MISALIGNED WELD
(1) Dirt or scale on jaws or blade.
(2) Blade ends not cut off square.
(3) Blade ends not correctly aligned when clamped in jaws.
(4) Worn jaws or inserts.
(5) Jaws are not aligned correctly.