KIROVETS K-744R1, K-744R2, K-744R3, K-744R4 tractors
78
4.8 DRIVER’S SEAT AND ADDITIONAL SEAT
Driver’s seat
(Fig.19) is adjustable by height, angle of back inclination in the longitudinal di-
rection and by weight of the driver.
Perform the adjustment by weight by moving handle 4.
Adjust the back installation at the required angle by pressing handle 1.
In order to adjust seat position in the longitudinal direction, lift handle 2, set the seat in the
required position and lower the handle.
Having seated on the seat, adjust the load according to your own weight. To increase the
load weight, rotate knob 4 clockwise; to decrease the weight, rotate it counter-clockwise.
Fig. 19 Driver’s seat
1
– back inclination lever; 2 – lever for seat longitudinal movement
adjustment (adjust the seat position in longitudinal direction with the handle lifted upwards); 3
– handle
for seat adjustment over height; 4
– handle for load adjustment by the operator’s weight
Additional seat
- soft, unsprung, fastened on the rear wall of the cabin.
4.9 LIGHTING AND ALARMS
Four headlamps are installed on the tractor for roadbed illumination.
The following elements are installed for illumination of the work area:
–
four rotary headlights on the front of the cabin;
–
four rotary headlights on the back of the cabin.
In accordance with traffic safety requirements, the tractor is equipped with the following light
signal devices:
