KIROVETS K-744R1, K-744R2, K-744R3, K-744R4 tractors
129
7.2 LIST AND CONTENTS OF WORK BY TYPES OF MAINTENANCE TO BE
PERFORMED BY OPERATOR IN THE PROCESS SEQUENCE
CAUTION
! ENGINE MAINTENANCE SHALL CORRESPOND TO THE ENGINE
OPERATION MANUAL
.
Maintenance when preparing new tractor for running-in, carrying out running-in,
upon completion of running-in
Job description
Preparation for
running-in
Execution of
running-in
Completion of
running-in
Notes
Inspect and clean the tractor from dust and
dirt
●
●
Wipe preservation grease off open parts of
hydraulic cylinder stems, spherical surfac-
es and threaded connections of the linkage
●
Check the tractor condition by visual in-
spection, paying attention to the absence
of leaks of fuel, oil, cooling fluid and elec-
trolyte, absence of extraneous noise, rattle
in the engine and in transmission units; if
necessary, eliminate all faults
●
●
●
Upon leak detec-
tion and elimina-
tion it is neces-
sary to check the
level of respective
fluids
Check the level and, if necessary, refill:
- oil into tank of hydraulic systems of the
linkage and for steering control
●
●
- oil into the gearbox hydraulic system
●
- oil into cases of the main and final
gears of driving axles
●
- cooling fluid into expansion tank
●
●
●
oil to the engine lubrication system
●
●
- electrolyte (or distilled water) into
storage batteries
●
Wash:
- filter for centrifugal cleaning of engine
oil
●
- gearbox filter
●
- breathers of driving axles, PDR (pump
drive reducers), fuel tank, single-speed
PTO reducer (if any)
●
Replace cardboard filter elements and
wash up the housings of hydraulic tank
filters
●
Drain:
- condensate from air cylinders
●
●
- 0.1 l of fuel from strainers and fine
mesh fuel filters
●
●
