HumEvap Mobile Humidifier
Installation
Manual Unit Water Supply
5
Open the Fill Hatch located on the control panel of the Unit and
carefully fill with mains or demineralised water.
Do not overfill the tank: Make sure that water level does not exceed
the MAX mark on the Water Reservoir.
The water level indicator lamp (Red light) will automatically indicate a
low water level in the Water Reservoir.
(see “Operating Parameters”).
If Red light shows, switch OFF the humidifier by turning the Fan
Switch to 0-Position.
Open the Fill Hatch of the Unit and refill with fresh or demineralised
water.
To run the Unit, turn the Fan Switch to either Lo or Hi fan speed
and increase the Humidity Control.
Make sure the water does not contact the controls on the
control panel of the humidifier.
Wipe water off with a dry cloth before starting the humidifier.
Water Reservoir
Re - filling
Fill Hatch
