28
15.7
REGISTERS CONCERNING OUTPUT (X AXIS)
Address of register
：
0015H ----- GENERAL OUTPUT POLARITY REGISTER
=======================================================================
Command/Return
：
(READ/WRITE)
0000H-->Active low. (default)
0001H-->Active high.
Note: There is only one general output bit for each axis , so only one polarity bit for it.
Address of register
：
0016H ----- GENERAL OUTPUT REGISTER
=======================================================================
Command/Return
：
(READ/WRITE)
0000H-->Inactive.
0001H-->Active.
Note: Only one general output bit for each axis
Address of register
：
0017H -- MODE REGISTER OF CLR_CNTR OUT
=======================================================================
Command/Return
：
(READ/WRITE)
0000H-->Generate an active low output for about 0.1s. (default)
0001H-->Take CLR_CNTR as second general output.(Only in this mode
，
function of
register 0018H and register 0019H is effective )
