JRC JUE-95SA -, Instruction Manual

Page: 8 / 70

vi
CAUTIONS DURING OPERATION
DANGER
Do not touch any internal parts with your hands or tools to avoid danger of electronic shock.
The lithium battery is built into JUE-95SA (EME). Do not short-circuited of the terminal,
do not give the high impact, and wet it to water. There is danger of exploding.
WARNING DURING OPERATION
WARNING
Do not bring JUE-95SA (EME) close to the fire, or put it in the fire. It causes the explosion,
generation of heat, and the ignition of a built-in lithium battery.
Do not approach the JUE-95SA (EME) while transmitting. It transmits microwave, and strong
microwave might be cause injury.
If a foreign substances, such as metal fragment, water, liquid and etc., are get into your
JUE-95SA, turn off the power, and contact the agent you purchased or JRC branches.
Continuous operation may cause fire, electrical shock or malfunction.
Ask maintenance and the adjustment of JUE-85 internal equipment to our sales department
or nearest branch office.
Do not turn on the terminal under the primary power except the specific voltage (mentioned
below). The primary power except the specific voltage may cause fire, electrical shock or
malfunction. AC100V/220V(
±
10%) DC 24V (+30%, -20%).
Do not check or repair the internal equipment of JUE-95SA by yourself.
Any electrical work by any person other than our specialized maintenance persons may cause
fire or abnormal operation of this equipment or electrical shock. This equipment meets the
technical standard of the Ministry of Internal affairs and Communications (MIC).
Do not adjust the internal circuit or exchange the parts, because the internal circuit is adjusted
strictly. When an abnormal operation is found, please contact to the dealer of agent you
purchased, or JRC branches.
Do not take apart, and do not remodel the equipment. It causes a fire, the electric shock, and
the breakdown.