JRC JUE-95SA -, Instruction Manual

Page: 48 / 70

3-14
Fig.
3.2.2m
Character Code
data setup error display 1
・
Error! Please set Scheduled Transmission #
●
Character Code IA5 or ITA2!
Response: Select Character Code of SSAS Schedule #
●
from IA5 and ITA2.
・ Error! Please set Scheduled Transmission # ● Character Code IA5 or DATA!
Response: Select Character Code of SSAS Schedule #
●
from IA5 and DATA
4. Following pop-up message is displayed after [SET] button is pressed, when winIST
failed to write the data into INMARSAT terminal.
Fig.
3.2.2o
Data setup failure window
In this case, carry out following procedure and do the setup again.
1). Click [Setting] of menu bar and open the dialogue box of COM PORT, then click [OK],
and confirm that COM PORT is opened normally.
2). Confirm that COM PORT of PC and PORT of IME is connected with serial cable.
3). Confirm INMARSAT terminal works normally or not, by seeing the ligtning of POWER-LED of IME.
5. Operation except Exit, Display, and Ver is not available during winIST is communicating with
INMARSAT terminal (the function of inner frame of
Fig. 3.2.2c SSAS Schedule screen
(E-mail selected) cannot be operated) .
Fig. 3.2.2n Character Code data setup error display 2
NOTE