JRC JMA-5212-4 Service Manual Download Page 111

Page: 111 / 172

5-1

5.1. Main Program Update Procedure

5.1.1. Items to be Provided

•

Compact flash card

•

PC card adapter for compact flash cards

•

New electronic program file (File name: 5200MK2prg.bin)

5.1.2. Update Procedure

(1)

Copy the new electronic program file into the root directory on the compact flash

card.

(2)

Insert the compact flash card with the PC

card adapter into card slot 2 (upper slot) in

the processor unit (NDC-1460).

(3)

Turn on the radar display system.

(4)

When the program update confirmation

screen is displayed, press the ENT button

on the keyboard. (If program update is to be

canceled, press the CLR/INFO button.)

(5)

When the message "Remove the card and

restart" is displayed, remove the compact

flash card, and restart the system.

Slot 1

Slot 2

Summary of Contents for JMA-5212-4













































































































































































Search results

Summary of Contents for JMA-5212-4

Reviews:

Brands by name

Popular brands

JRC JMA-5212-4, Service Manual

Search results

Summary of Contents for JMA-5212-4

Reviews:

Brands by name

Popular brands