JRC JLN-650, Instruction Manual, Page: 54 / 190

2-18
2.2.6
Tidal Profile Display
The current (direction/speed) to depth layer (*601) from the surface to bottom of the sea is displayed in
the graph by the depth of each 2m.
Five current layers of a numeric display are seen, and the current in about 50 layers is seen in depth from
12m in depth to 112m in case of addition, for instance, 150m in depth it and because the graph is
displayed at the same time, can the twist of the current from the surface to bottom of the sea and the
change in swinging can be seen.
Profile screen is displayed with the [PROFILE] key.
There are two screens; profile 1(line graph) and profile 2(ellipse graph), and the screen changes into the
profile screen whenever the [PROFILE] key is pushed.
1) Profile 1 screen (line graph display): Example of display
*601 Depth in which the current can be measured is up to a depth value of about 80% of the bottom of the sea depth.
Moreover, it changes by the oceanographic condition though the maximum measurement depth of layer is about 200m.
*602 Refer to 4.7.2 “Two Display of Profile Setting (Ellipse Display)”.
Absolute
Current:
Depth
Current
Speed
Direction
Relative
Current:
Standard
Layer
Current
Speed
Direction
Mode/Screen
Compass/Bearing
Ship Speed
・
Course:
Doppler S. Speed:
Bottom Tracking/
Water Tracking
GPS Ship Speed: GPS
Water
Temperature
Wind Direction
Wind Speed
Current Display
：
Absolute
Relative
Bearing Standard
：
North up Bearing
Head up Bearing
Depth Range of
Graph
Profile Current
Current Speed
Display Graph
Flow Direction
Horizontal Cursor
and Depth
Depth Range
Vertical Cursor and
Flow Direction Value
Flow Direction of
D Layer
Bottom
Flow Speed of
D Layer
Flow Speed Range
Vertical Cursor and
Flow Speed Value
Bottom
Bottom
Depth
Profile Current
Current Direction
Display Graph
Bottom Line
Profile 1 Screen
Line Graph Display
Profile 2 Screen
Ellipse Graph Display
PRO
FILE
PRO
FILE
PRO
FILE
Profile 3 Screen
Upwelling Graph Display
PRO
FILE