JRC JLN-650 Instruction Manual Download Page 108

Page: 108 / 190

4-32

Ship Speed Range

・

Function

・

The maximum display value of the graph is set.

Setting value: [ 5 10 15 20 25 30 40 ] kn

The setting of the time axis is common with current/depth graph.

Operation

Standard Menu:

“

Graph Picture setting

”

menu/Ship speed range: 10 kn

Selection Frame Menu:

“

Ship Speed graph

”

menu/Ship speed range: 10 kn

Ship Speed Graph

・

Function

・

When OFF is selected, the ship speed graph display can be erased.

Setting value: [ Display ON OFF ]

The amount where the ship speed graph disappeared expands current/depth graph and is

displayed.

Operation

Standard Menu:

“

Graph Picture setting

”

menu/Ship Speed Graph: Display ON

4.5.3

Water Temperature Graph Setting

・

Function

・

The elapsed time of the water temperature is displayed in the graph. (*1)

The displayed range of the water temperature can be changed by a set menu.

The water temperature graph is set by measure setting/alarm and graph setting (*2) of the

menu.

In the setting of alarm and the graph, a center temperature in the water temperature graph

and width (range) in the water temperature graph are set.

The setting of the time axis is common with current/depth graph.

Operation

Standard Menu:

[MENU] key/Menu screen/Measure setting

≫

/[ENT] key/

“

Measure

setting

”

menu/Alarm and Graph setting

≫

“

Alarm and Graph setting

”

menu/

Temperature Graph Center and Temperature Graph Width

Selection Frame Menu:

[

□

] key/ Enclose “Water temperature graph” with the frame

/[MENU] key/

“

Water temperature alarm and graph

”

menu/Temperature Graph Center and

Temperature Graph Width

Water Temperature Display

・

Function

・

The water temperature graph display can be erased by selecting OFF.

Setting value: [ Display Non-display ]

The amount where the water temperature graph disappeared expands current/depth

graph and is displayed.

Operation

Standard Menu:

[MENU] key/Menu screen/Picture Setting

≫

/ [GRAPH] screen

≫

[ENT]

key/“Graph Picture setting” menu/Temperature display: Display ON

*1 It is necessary to connect the water temperature sensor for the display of the water temperature graph.

*2 The water temperature graph is on current 1, current 2, and the [GRAPH] screen, and the graph setting is common.

Measure setting/Alarm and Graph setting: Refer to 4.1.8 “Setting of Measurement Alarm and Water Temperature Graph”

Water Temperature Center and Water Temperature Graph Width.

▼

Summary of Contents for JLN-650































































































































































































Search results

Summary of Contents for JLN-650

Reviews:

JRC JLN-650, Instruction Manual, Page: 108 / 190

Search results

Summary of Contents for JLN-650

Reviews: