JRC JHS-182 - Instruction Manual Download Page 69

Page: 69 / 98

5-48

5.3.4.4 LONG RANGE RESPONSE SETTINGS

To set the Long Range Response, select

4.LONG RANGE RESPONSE

Auto response (AUTO) and manual response (MANUAL) can be selected.

This setting works when a long range communication device is connected.

The default setting is AUTO. Use the Jog Dial for selection and confirmation.

Long Range Response Screen

5.3.4.5 BUZZER SETTINGS

To set the buzzer beeping functions, select

5.BUZZER

Each buzzer functions can be set enable (ON) or disable (OFF) as followings..

BUZZER : ON / OFF

ON : Key touch beeping is enable and the other buzzer function can be work by the each setting.

OFF : All buzzer functions are disable including key touch beeping.

MESSAGE : ON / OFF

When a binary message is received.

GUARD ZONE ALARM : ON / OFF

When a other ship approaches within the guard zone range

LOST TERGET ALARM : ON / OFF

When a other ship information within the range is not received for 6 minutes.

ALARM : ON / OFF

When a failure alarm occurs.

Setting of Buzzer functions

LONG RANGE RESPONSE

AUTO

5.BUZZER :

  - MESSAGE        :ON
  - GUARD ZONE ALM :OFF
  - LOST TARGET ALM:OFF
  - ALARM          :ON

Summary of Contents for JHS-182 -



































































































Search results

Summary of Contents for JHS-182 -

Reviews:

Related manuals for JHS-182 -

Brands by name

Popular brands

JRC JHS-182 -, Instruction Manual

Search results

Summary of Contents for JHS-182 -

Reviews:

Related manuals for JHS-182 -

Brands by name

Popular brands