JRC JHS-182 -, Instruction Manual

Page: 51 / 98

5-30
d) SENDING AND SAVING MESSAGES
In case, “FUNCTION” in Message Type Screen (see a), b) Message Type) is TEXT, for sending or
saving messages, follow the instruction below:
1. Select [SAVE], and save the sent message. Then go to Message
Menu Screen. (The data is displayed at TX TRAY.)
2. Select [TX], then save the sent message, sent sentences and
go to Message Menu Screen. (The data is displayed at TX TRAY.)
If [EXIT] is selected, the MESSAGE TYPE SETTINGS Screen
appears.
Or in the case” Function” is CAPA INTERROG, sending/saving messages are displayed.
d) RETURY SETTINGS
When a message is sent with FORMAT is ADDRESSED, the sender is supposed to obtain a
certification message of receiving from the receiver. When such message is not received because of
some reasons, the sender retries to send the certification message. (= Retry)
Setting up Numbers of Retries
Numbers of retries are changeable. (0
〜
3, default value is three.).
EDIT AND TX UTC 11:44
BRG : RNG NAME / MMSI
270°: 0.18NM
35°: 0.29NM
* 22°: 0.92NM
OCEAN-LINE
QUEEN
ABCDEFG−MARU
HOW ARE YOU ?
ABCDEFGHIJKLMNOP
QRSTUVWXYZ. 0123
456789 [ ]̲
“
#$%&
’
()?@+-*/^,:;<=>!
[EXIT]
[SAVE]
[TX]
[ALL CLR]
1.FORMAT : ADDRESSED
MMSI : 987654322
2.CATEGORY : ROUTINE
3.FUNCTION:
CAPABILITY INTERROGATE
4.CH : AUTO
[EXIT]
[SAVE]
[TX]
6. NUMBER OF RETRIES： ３ 6. NUMBER OF RETRIES： ３ 6. NUMBER OF RETRIES： １
Change by the Jog Dial. Change to “3” on the command of transponder.
Retry Settings
SENDING AND SAVING MESSAGES