JRC JFE-400 Instruction Manual Download

Page: 54 / 104

4. Operation

4-16



DIFF (Time difference)



FORMAT (Date display

)



12/24

(Time

notation)

・

Touch

and the setting will be displayed.

・

Touch

to increase the value and

to decrease it.

・

When the time difference is “±0", it is recognized as UTC.

・

After setting, touch

・

Touch

and the settings will be displayed.

・

Set content

：

YY-MM-DD DD MM,'YY MM DD,'YY is displayed.

YY-MM-DD

：

Change the notation to YY-MM-DD

DD MM,‘YY

：

Change the notation to DD MM,‘YY

MM DD,‘YY

：

Change the notation to MM DD,‘YY

・

Change the settings with

・

After setting, touch

・

Touch

the settings will be displayed.

・

Set content

：

12/24

：

12 hour notation.

：

24 hour notation.

・

Change the settings with

・

After setting, touch

Summary of Contents for JFE-400









































































































Search results

Summary of Contents for JFE-400

Reviews:

Related manuals for JFE-400

Brands by name

Popular brands

JRC JFE-400, Instruction Manual

Search results

Summary of Contents for JFE-400

Reviews:

Related manuals for JFE-400

Brands by name

Popular brands